How to Compare Project Finance Companies for an Energy Project

How energy and infrastructure developers should compare project finance companies, from bankability tests and offtake to DSRA, construction support and term sheets.

Share

Developers who search for project finance companies are usually trying to answer a practical question: who will actually fund this energy or infrastructure project, on what terms, and what do they need to see first? The market is not one list. It includes commercial banks with project finance desks, energy and infrastructure debt funds, export credit agencies working with partner banks, and a smaller set of specialist lenders. This guide is a comparison checklist for sponsors who want to run a focused process, not a ranking of firms.

A dated overview of the banks that lead global mandated lead arranger tables, and of the other company types around them, is in Top Project Finance Companies Globally.

Financely's energy project finance advisory work sits on the sponsor side of that process: preparing the file, testing bankability, and introducing the project to lenders who can underwrite it.

What project finance companies actually underwrite

Project finance is lending against the cash flows of a single-purpose project company, with security over the shares, the contracts and the asset, rather than a general corporate loan to the sponsor. That is why so many deals sit in a special purpose vehicle; the guide to why SPVs are used in project finance covers the structural reasons. The lender's credit question is whether those contracted cash flows, after operating costs and taxes, can service the debt through construction, ramp-up and operations, including in a downside case.

The World Bank Private Participation in Infrastructure database is a public record of how often private capital is used for energy and infrastructure projects worldwide. It is not a lender list, but it is a reminder that this market is real, documented and cyclical. What changes from one project finance company to another is not the basic idea. It is the risk they will take on technology, country, construction and offtake.

The bankability tests that drive the comparison

Before comparing margin, compare whether the company will look at the project at all. These are the tests that usually decide that.

Offtake and revenue

A contracted power purchase agreement with a creditworthy buyer is still the standard path for many renewable and conventional power deals. Merchant or partially contracted revenue can be financeable, but the lender set shrinks and the debt quantum usually falls. Some funds will take more merchant risk than regulated banks. The offtake terms, tenor, termination rights and curtailment treatment belong in the first memo, not in a later appendix.

Construction and completion

Can the project finance company take construction risk, or does it only refinance operating assets? Banks and funds that do construction facilities will ask for a fixed-price, date-certain engineering, procurement and construction contract, liquidated damages, a completion test, and often sponsor support until those tests are met. A term sheet that is silent on completion support is incomplete.

Reserves and coverage

Most lenders require a debt service reserve account (DSRA) and set a minimum debt service coverage ratio. The reserve can be cash funded at close or built up from operating cash flow, and that choice changes both the sources and uses and the residual equity the sponsor must provide. Coverage tests, cash sweeps and distribution lock-ups often matter more over the life of the loan than a small difference in margin.

Environmental, social and permitting risk

Many commercial banks that participate in international project finance apply the Equator Principles when a deal meets their threshold. That is not a formality. It affects the environmental and social workstream, the timeline to first draw, and which projects a given bank can take to credit committee. Funds and some bilateral lenders may use a lighter framework, but they still ask for permits, land rights and a clear path to construction.

How to compare term sheets

Once two or three project finance companies are willing to look at the same file, compare the sheets on the same points, in writing.

  1. Quantum and gearing. How much debt will they actually size on the base case and the downside case, and what equity remains for the sponsor?
  2. Tenor and profile. Construction tenor, conversion to a term loan, sculpted amortisation, and whether a mini-perm refinance risk sits with the project in year five or seven.
  3. Sponsor support. Completion guarantees, cost overrun commitments, and the exact tests that release them. "Non-recourse" should be defined, not assumed.
  4. Reserves, sweep and covenants. DSRA sizing, cash sweep, distribution conditions, and what happens after a coverage breach.
  5. Conditions to close. Offtake, permits, insurance, model audit, independent engineer, know-your-customer and any third-party consents. A cheap margin with a long, open-ended conditions list is not a cheaper loan.
  6. Hold and takeout. Will the company hold the loan, syndicate it, or expect a refinance at commercial operation? That affects execution risk after signing.

Illustrative example only: two project finance companies offer a similar headline margin on a contracted solar project. The first requires a fully cash-funded DSRA, a tighter coverage ratio and sponsor completion support until the plant passes a defined test. The second accepts a reserve built from cash flow, a slightly lower coverage test and releases sponsor support earlier, but sizes a smaller loan. The "cheaper" sheet may leave the sponsor putting in more equity at close, or taking more completion risk. The comparison has to be done on sources and uses and on residual risk, not on margin alone.

The file to send before a full data room

  • A short project memo: technology, location, capacity, offtake status, land and permits, construction contract status, and the ask.
  • A sources and uses, including interest during construction, reserves, transaction costs payable to third parties, and the sponsor equity already committed.
  • A financial model with base and downside cases, coverage ratios and the DSRA clearly shown. See financial modelling for renewable energy projects for the modelling work lenders expect.
  • The offtake draft or term sheet, the construction contract status, grid connection, and a permit register.
  • An independent engineer's scope, or at least a plan to appoint one, plus insurance and resource data where relevant.
  • The sponsor's track record and the know-your-customer documents for the project company and its owners.

A complete short file gets a faster, more honest answer than a large, unindexed data room. Project finance bankability requirements sets out the same tests from the credit committee's point of view.

Common traps

  • Treating every "project finance company" as a lender. Some names in search results are advisors, brokers or listicle pages. Confirm who would hold the credit.
  • Running a wide process too early. An unfinished model and an unsigned offtake, shared with a long list, creates noise and weak term sheets.
  • Ignoring construction versus term appetite. Approaching a lender that only refinances operating assets with a shovel-ready, unbuilt project wastes months.
  • Underestimating reserve cash. A DSRA and other reserves can add a material equity cheque at close. Model them before you negotiate.
  • Assuming non-recourse means no sponsor support. Read the completion and overrun language with counsel before comparing headlines.

How Financely helps

Financely advises sponsors and developers on whether a project is ready for a lender process, what bankability gaps must be closed first, and which project finance companies are a realistic fit for the technology, jurisdiction and risk allocation. We prepare the memo and model pack, run a targeted process, and compare term sheets on quantum, support, reserves and conditions to close. Financely is an advisor and arranger. It does not lend, guarantee or hold funds. The starting point for that work is energy and data center project finance advisory.

Frequently Asked Questions

What are project finance companies in this context?

The term is used loosely. It can mean commercial banks with a project finance desk, infrastructure and energy debt funds, export credit agencies and their partner banks, or advisors who arrange those facilities. The common thread is that they underwrite cash flows of a project company, not the sponsor's corporate balance sheet alone.

How should a developer shortlist project finance companies?

Start with who actually lends to the technology, jurisdiction and ticket size in question, then look at who can take construction risk, who needs a fully contracted offtake, and who will require Equator Principles or similar environmental and social work. A short, well prepared list beats a wide, unfocused outreach.

Do project finance companies lend on a fully non-recourse basis?

Many facilities are limited recourse rather than fully non-recourse. Sponsors are often asked for completion support, cost overrun commitments, or guarantees that fall away after commercial operation. The term sheet should say exactly when any sponsor support ends.

What is usually in a project finance term sheet?

Facility size and tenor, construction versus term conversion, the debt service reserve, cash sweep, coverage ratios, offtake and construction conditions, security over the project company and contracts, and the conditions to financial close and first draw.

Does Financely provide the project loan?

No. Financely is an advisor and arranger. It prepares the bankability file and runs the process with third-party project finance companies. Those institutions make every credit decision.

Next Step

If you are preparing a financing like this, send a short summary of the transaction, the numbers and the timetable. Request a free estimate. If you are ready to begin work straight away, you can also start your engagement.

Financely acts as an advisor and arranger, not a lender, issuer or guarantor, and does not hold client funds. Financing is subject to lender appetite, due diligence, compliance approval and documentation. This article is general information, not legal, tax or accounting advice.